Sign in perhaps register 。

Plan scheme : Martensitic chromium alloy pipe and chromium alloy pipe with Cr composition exceeding %, without high carbon steel and high chromium alloy pipe. The aqueous solution contains % sodium cyanide % ~ % (volume ratio), the solution temperature is ~ ℃, and the solution time is min.In order to make the welded pipe have the required mechanical, physical and chemical properties, in addition to the reasonable selection of materials and forming process, heat treatment process is often necessary. In addition, the mechanical, physical and chemical properties of aluminum, copper, titanium and their alloys can be changed by heat treatment to obtain different service properties.ERD,Speed up the construction progress: weld the mesh with reinforcement to allow the rapid construction of the project. The required laying of welded steel bars is provided, so concrete can be poured, steel cutting, stitching, etc., and the arrangement can be strengthened. ？ saving construction time? The construction progress is greatly accelerated and the construction period is shortened. The defects can be removed by grinding with sand wheel, but the remaining wall thickness must be within the allowable standard.Goodlands,Application characteristics of I-beam:→ under the same section load,ERDHow many steel bars does the garage need per square meter, the weight of hot-rolled H steel structure is reduced by % - % compared with the traditional structure. Frame line crack

The wear resistance, fracture toughness, impact toughness and bending strength under different process conditions were compared, and then the heat treatment process of GCrMo was determined. Development and application of ZYS- bearing damping and antirust oil. Bearing is a new type of multial damping and antirust oil. It takes refined mineral oil as the base oil and is equipped with various additives such as antirust and antifriction. Through comparison test, it is proved that ZYS- bearing damping and antirust oil has outstanding damping effect and good antirust lubrication performance.The smooth of steel pipe is mainly through tension reducing, which is a continuous rolling process of hollow base metal without center and tip. Under the condition of ensuring the capillary welding quality, the whole welded pipe is heated to more than ℃ by the welded pipe tension reduction process, and then rolled to finished pipes with various outer diameters and wall thicknesses by the tension reduction machine ( times in total). The fluid pipes produced by developed countries in the world have adopted the welded pipe smooth process in a large number of boiler pipes. With the development of society, Domestic hot welded pipe has gradually formed a situation to replace smooth pipe. Special rolling method. When it is difficult to roll the required I-beam by the usual rolling method for some reason, the special rolling method can be used to make full use of the skills of uneven deformation and pass design. For example, the wave rolling method can be used; for example, when the billet is wide and small I-beam is required to be rolled, the negative rolling method can be used Spread rolling, etc.Where is good,When we carry out different projects, we must use different raw materials, which can ensure the quality of the project. In many kinds of data, alloy pipe is widely used. In many projects, we will apply it, so it is very popular in the field. When people carry out the construction of alloy pipe project, there are many things that must be paid special attention to. Let&#;s take you to know:Welded steel pipes need to be processed through various processes before application. The heat treatment of welded steel pipes is a very important link in the processing of welded steel pipes. Hot working is a metal hot working process in which metal materials are heated, insulated and cooled in a certain medium, and their metal properties are controlled by changing the metallographic structure on the surface or inside of the material. During the heating and cooling process of structural welded steel pipe workpiece, due to the inconsistency of cooling speed and time between the surface and the core, the temperature difference will be formed, which will lead to uneven volume expansion and contraction and produce stress,ERDHow much is 32 galvanized pipe,ERDWhere can I buy steel bars, that is, thermal stress.Alloy pipes can be used for heating (cooling) projects.

With the development of steel structure buildings only I-beam is not enough, that is, thickened I-beam, which is easy to lose stability for load-bearing columns.Safety and health, Small longitudinal crackIdler pipe: it is used for electric welding steel pipe of idler of belt conveyor. It is generally made of Q, QA, end face straightness with the center line and ovality. Generally with a diameter of -mm. There are certain requirements for pipe tortuosity, water pressure and flattening tests are carried out.Under the action of thermal stress, because the initial temperature of the surface layer is lower than that of the heart and the shrinkage is greater than that of the heart, the heart is pulled. At the end of cooling, because the final cooling volume shrinkage of the heart cannot be carried out freely, the surface layer is compressed and the heart is pulled. That is, under the action of thermal stress, the surface of the workpiece is finally compressed and the center is pulled. This phenomenon is affected by factors such as cooling rate, material composition and heat treatment process. The faster the cooling rate the higher the carbon content and alloy composition, the greater the uneven plastic deformation caused by thermal stress during cooling, and the greater the final residual stress. On the other hand, due to the change of microstructure during heat treatment, i.e. the transformation from austenite to martensite, the increase of specific volume will be accompanied by the expansion of workpiece volume, and each part of workpiece will undergo phase transformation successively, resulting in inconsistent volume growth and structural stress. The final result of the change of tissue stress is the tensile stress on the surface and the compressive stress in the center, which is just opposite to the thermal stress. The microstructure stress is related to the cooling rate, shape and chemical composition of the workpiece in the martensitic transformation zone.ERDWays to obtain surface compressive stress characteristics of alloy tubesWhat are the uses of I-beam?I-beam is widely used in buildings or other metal structures.