Sign in perhaps register 。

it must be ensured that the floor is dry, the installation of the floor must be carried out before other decoration works are completed.If the floor is not flat, the installation will cause some floors and keel to hang, which will make a sound when people step on it.We can also scrape the board with a blade.The real solid wood floor is painted with wood, and the refurbished board is made of floor, white putty and paint.Scrape the surface with a blade. If it is white, it is a refurbished plate.How to choose the floor?What is the difference between solid wood,DucosAntistatic floor manufacturer, composite and reinforced?Ducos,Olfactory effect: all kinds of wood often give off a particularly pleasant smell. They are used to fenduojing. After experiments,DucosFloor glue waterproof, stimulate spirit, calm nerves and produce health care effects on human health.Secondly, choose the color you want.Bello,The general specification and model of general floor is cm×cm, the specification and model of high-capacity floor can reach cm×cm, with a total area of times that of the general wooden floor.The floor is generally made of common materials such as red sandalwood and Huanghua pear wood. The corner material is discarded and made of a key part of the whole tree. It mainly shows the air. The road construction has an endless sense of flexion and extension and three-dimensional feeling.The real wood floor is processed with a whole plate,DucosAnti floor, with natural texture, and its section texture can correspond to the surface texture one by one;Fake solid wood floor is mostly pasted with leather or stickers on the fake floor, so the cut texture is not commensurate with the surface texture.How to lay lacquer cloth?The construction procedures and methods are as follows: first, measure the structural size of the room accurately;Then cut the lacquer cloth according to the size.Note that the cutting width should be slightly larger than the required width to facilitate overlapping, matching and trimming during paving.The cut floor paint cloth shall be placed at room temperature of no less than ℃ for about hours, so that the crimped part of the floor paint cloth can be fully extended and ready for the final paving.Special adhesive shall be used for paving the floor paint cloth.Before paving the indoor ground shall be treated first.

First, look at environmental protection Clean the paint, grease, etc. on the ground.The surface texture of solid wood floor is clear and natural, and there is no obvious color difference on both sides.Medium and low grade solid wood floors indicate that cracks may occur.If the crack is not a problem between textures, there will be some hidden dangers if the crack passes through the texture.Pursuit of excellence, Solid wood flooring. Look at the surface of the board.： I can smell faint wood fragrance. This floor shows that the glue content is very low.Up to European standard E level.

Again, ask what kind of material is the veneer on the floor (because the prices of different materials vary greatly).Installation works,Structure: it is made of pure solid wood from inside to outside which is often made of pine, fir and other softwood. Use a level to detect the flatness of the ground and keep the ground on the same level.Advantages: high wear resistance, good reliability, moisture-proof, good management methods, rich and colorful color and pattern design types, and large price range.Ducos,Advantages: high wear resistance, good reliability, moisture-proof, good management methods, rich and colorful color and pattern design types, and large price range.Don&#;t pour the floor wax directly on the wooden floor.Otherwise, there will be traces and traces.Carefully apply according to the wood grain direction of the wood floor. Do not apply or the thickness is uneven.Too little application will cause uneven thickness, and too much application will lead to poor film formation.Keeping thin and uniform is the key to waxing.Do not dilute the floor wax with water.Solid wax must be ground after polishing.The standard ones are generally -mm wide about and long. The wide ones are mostly more than mm long and about mm wide. The narrow ones are - mm long and about mm wide. They are similar to the specifications of solid wood flooring, and most of them are called imitation solid wood flooring.